Fuel System Rebuild Phase 2 (Cont)

Recent cold weather has slowed down my progress in the garage. Nonetheless, I did make some progress yesterday. I was able to finish cleaning all the injectors and mount the new seals on then. I also completed the new fuel line install for the frequency valve. I still have a couple of outstanding fuel lines to install. First is the line between the fuel filter and the fuel distributor. That line required my to raise the rear end of the car to gain access to the filter, which is mounted on the left-rear side of the frame. Second is the return line from the fuel distributor to the accumulator. I'm going to try and knock these out this week.

 

And here are most of the new fuel lines installed: