I rigged up an RPM relay jumper to manually trigger the fuel pump and pressurize the system. You can see it in the picture below. I used a board and mounted a 2-way toggle switch on it so I could operate it from the back of the car. I found one leak at that compression fitting in my previous post. I tightened it up and got it leak-free as of now. No other leaks were found. Initially the injectors were somewhat flowing ok but the battery just would not take a charge and appears to be dead now. I'm replacing the battery in the next few days so I'll have to wait and finish the flow testing then.
If all goes well I should be able to install the injectors into the cylinder heads with the retaining clips and see if I can get her running. I feel like we're pretty close here barring no major setbacks.
